8 Pack Bundle of D&T Animations and Exercises

• Recording ideas and designs using notes and sketches (animation)

• Design development animation

• Isometric drawing animation and exercises

• Oblique drawing animation

• 1 point perspective drawing animation and exercises

• 2 point perspective drawing animation and exercises

• Parts drawing and cutting list animation

• Rendering exercises

• Workshop safety rules

• Workshop safety in detail

• Risk assessment exercises

• The reason that wood joints are used

• Butt joint

• Lapped joint

• Tongue and grooved joint

• Finger joint / comb joint

• Dovetail joint

• Lapped dovetail joint

• Housing joint

• Corner bridle joint

• Through mortice and tenon joint

• Stopped mortice and tenon joint

• "T" halving joint

• Bare faced tenon joint

• Dowelled joint

• Cross halving joint

• "T" bridle joint

Measuring Tools Animations

• steel rule
• micrometer
• digital micrometer
• vernier caliper
• height gauge
• depth gauge
• micrometer depth gauge
• internal caliper
• external caliper
• combination set
• dial gauge 
• screw pitch gauge
• feeler gauge
• limit plug gauges (GO / NOGO gauges)
• limit ring gauge
• snap gauge
• drill gauge
• radius gauge
• protractor
• spirit level
• electronic devices 

• pens and pencils
• scriber
• marking knife
• engineer's square
• woodworker's try square
• dividers trammel
• odd leg calipers
• marking gauge 
• cutting gauge
• mortice gauge
• centre punch
• dot punch
• mitre square
• centre square
• sliding bevel
• bradawl
• surface gauge
• straight edge
• vee block
• angle plate
• templates
• surface plate

The hand tools animation consists of:

• planes:

  • jointer plane

  • jack plane

  • smoothing plane

  • bench plane sizes

  • plane parts

  • sharpening angles for plane cutting irons

  • grinding and honing

  • frog angles

  • rebate plane

    • marking out a rebate

    • planing a rebate

  • shoulder plane

  • bull nose plane

• spokeshaves

• wood chisels:

  • firmer chisel 

  • bevel edged chisel

  • mortice chisel

    • using a mortice chisel

  • gouge

• cold chisel

• tinsnips and shears

  • using tinsnips

• saws for wood:

  • tenon saw

  • dovetail saw

  • cross cut saw

  • rip saw

  • coping saw

• hacksaw

• junior hacksaw

• abra file

• hammers and mallets:

  • engineer's ball pein hammer

  • sledge hammer

  • rubber mallet

  • plastic faced hammers

  • soft faced hammers

  • rawhide mallet

  • bossing mallet

  • raising hammer

  • planishing hammer

  • doming hammer

  • cross pein hammer

  • claw hammer

  • woodworker's mallet

• files:

  • description

  • roughness of cut

  • hand file

  • flat file

  • half round file

  • round file

  • square file

  • three square file

  • knife file

  • needle files

  • Swiss wax files

• drills:

  • brace and bit

  • how to use a brace and bit

  • twist drills

  • countersink

    • riveting with countersunk head rivets

  • hand drill / wheel brace

• Taps and dies:

  • taps and tap wrench

  • tapping a thread

  • die and diestock

  • cutting an external thread

  • drunken threads.

Also includes:

• workshop safety rules

• workshop safety in detail

• risk assessment exercises

The machine tool animations illustrate: 

• CNC:

  • description of computer numerical control

  • links between CAD, CAM and computer control

  • main difference between manual and CNC machines

  • 5 axis CNC miller

  • CNC lathe

• buffer:

  • using a buffer

  • pickling

  • etching

• sanding machines

  • disc sander

  • orbital sander

  • belt sander

  • reciprocating sander

  • spindle sander

    • abrasive papers and cloths

    • abrading

    • emery cloth

• grinding machines:

  • bench grinder

  • surface grinder

  • angle grinder

• drilling machines:

  • pillar drill

  • chuck key safety

  • portable power drill

  • twist drill bit

  • SDS drill bit

  • taper shank drill bit

  • grinding angles for drill bits

  • reamers

  • centre drill

  • countersinks

  • masonry drill bit

  • brad point drill bit

  • auger bits

  • flat bit

  • Forstner bit

  • counterbore and plug ctter

  • hole saw

• vertical milling machine

• router (power router):

  • router cutters

  • router collet

  • setting the depth of cut

  • using a power router

  • routing jig

  • router safety

• horizontal milling machine

• centre lathe:

  • lathe parts

  • holding work in a three jaw chuck

  • holding work in a four jaw chuck

  • turning between centres

  • facing off

  • parallel turning

  • taper turning

  • cutting tools

    • cutting tool grinding angles

• power hacksaw

• planer / thicknesser:

  • planing a face

  • planing an edge

  • thicknessing

• wood saws:

  • bandsaw

    • using a bandsaw

  • circular saw

  • circular saw power tool

  • jig saw

  • fret saw:

    • parallel arm mechanism

    • parallel link arm mechanism 

    • C-arm mechanism

• morticer:

  • using a morticer

• wood lathe:

  • belt and pulley arrangement

  • turning between centres

  • turning on a face plate

  • scraping action

  • cutting action

  • chisels, scrapers and gouges

• Shears:

  • bench shears

  • pneumatic guillotine

  • press tool.

• types of motion

• levers: Class 1, Class 2, Class 3, bell crank lever

• linkages

• pulleys and belts:

  • used to transmit motion and torque 

  • change speed of rotation

  • stepped cone pulleys

  • pulley belts used to transport products

  • pulley belts used as bandsaws

  • pulleys used for lifting and hauling

• chain and sprocket drive

• chain parts

• Gears:

  • spur gears

  • gear train

  • bevel gears

  • worm gear

  • rack and pinion

• cams, rotary and linear, cam followers

• ratchet and pawl

• crank mechanisms

• crank and slider

• application of screw mechanisms:

  • for clamping

  • to control movement

  • for lifting

• ball screws

• couplings

  • flanged

  • split

  • flexible

  • universal joint

• friction used to oppose motion:

  • brakes

  • clamps

  • grips / knurling

• reducing friction by the use of lubricants and bearings

• lubrication

• bearings:

  • bush

  • ball bearing

  • roller bearing

• mechanisms used on a bicycle.

• description of "plastic"

• the main ingredients of most plastics

• thermoplastics

• thermosets

• thermoforming:

  • line bending

  • vacuum forming

    • commonly used materials

  • plug & yoke

• expanded polystyrene (EPS)

• structural foam

  • commonly used materials

• rotational moulding

  • commonly used materials

• injection moulding

  • commonly used materials

• gas assisted injection moulding

• injection blow moulding

• extrusion blow moulding

  • commonly used materials

• inserts in plastic mouldings

• blown film

• thermosets

• resins

• hand lay-up of glass reinforced plastic (GRP)

• sprayed polyester resin and reinforcing material

• resin transfer moulding

• pultrusion process

• injection moulding

• compression moulding:

  • dough moulding compound (DMC)

  • sheet moulding compound (SMC)

• commonly used abbreviations of the names of polymers.

The Interactive Worksheets and Exercises package consists of:

• isometric drawing exercises

• 1 point perspective drawing exercises

• 2 point perspective drawing exercises

• colouring and shading (rendering) exercises

• measuring and marking out test

• marking out and cutting tenons exercise

• drills and bits exercises

• file types and uses exercises

• hand tools exercise

• saws and their uses exercise

• screw cutting tools exercise

• reading a vernier caliper exercise

• choosing the correct machine tool exercise

• use of the buffer exercise

• sanders and grinders exercise

• machines exercise

• wood machine exercise

• turning exercise

• wood turning exercise

• making cupboard doors in MDF exercise

• using machines to make products exercise

• batch production of copper jewellery exercise

• how plastic bottles are made exercise

• manufacturing children's tableware exercise

Learning Objectives

Students will learn to apply skills and knowledge of : 

• graphic techniques

• measuring and marking out

• hand tools and machines

• wood joints

• plastic materials and processes

• mechanisms

• safety

With regard to safety, students will learn:

• safety rules

• designer's safety responsibility

• risk assessment

• safety rules and defined procedures

• hazard warnings and instructions

• safe materials

• safe storage of materials

• tool safety

• safety features on tools

• safe working practices

• safe working area

• product safety

• to write risk assessments.

Product cost

8 Pack Bundle of Animations and Exercises
Download from our website (Approx. 22.9 MB)

Minimum System Requirements